National Instruments NI 1450 Series 用户手册
Chapter 2
Setup and Configuration
2-2
ni.com
❑
4-position power connector—required if you are not using the
NI desktop power supply
NI desktop power supply
❑
10 m 10/100Base-T Ethernet cable (part number
189174-10)—standard CAT 5 10/100Base-T Ethernet cable for
connecting the NI 1450 to a network port. To connect the NI 1450
directly to a local development computer, use an Ethernet crossover
cable.
189174-10)—standard CAT 5 10/100Base-T Ethernet cable for
connecting the NI 1450 to a network port. To connect the NI 1450
directly to a local development computer, use an Ethernet crossover
cable.
Note
To maintain signal integrity, the Ethernet cable length must be no longer than 100 m.
Software
❑
NI-IMAQ for IEEE 1394 Cameras driver software, which includes the
NI 1450 support software
NI 1450 support software
❑
One of the following application software packages:
•
National Instruments Vision Builder for Automated Inspection
(AI), version 2.0 or later
(AI), version 2.0 or later
•
National Instruments LabVIEW Real-Time, version 7.0 or later,
with the Vision Development Module, version 7.0 or later
with the Vision Development Module, version 7.0 or later
Accessories
National Instruments offers the following accessories for use with the
NI 1450.
NI 1450.
Hardware
•
VGA-resolution camera (part number 778785-01)
•
12 mm fixed focal length lens (part number 778789-01)
•
LED ring light (part number 778787-01)
•
DIN rail/panel mount kit (part number 189154-01)
•
Digital I/O cable and horizontal DIN rail terminal block (part number
778790-01)
778790-01)