KTI Networks Multi-tool KGC-311 用户手册
General
The KGC-311 is a mode to mode optical fiber converter se-
ries which provide the following conversions:
ries which provide the following conversions:
1000BASE-SX MM fiber to/from 1000BASE-LX SM fiber
100BASE-FX MM fiber to/from 100BASE-FX SM fiber
Features
Complies with IEEE 802.3z 1000Base-SX/LX and IEEE
802.3u 100Base-FX standard
802.3u 100Base-FX standard
Provides media conversion between single mode and
multimode optical fiber media types
multimode optical fiber media types
Supports both 1000Mbps Gigabit Ethernet fiber and
100Mbps Fast Ethernet fiber applications
100Mbps Fast Ethernet fiber applications
Provides two SFP slots to support standard SFP fiber
transceivers
transceivers
Transparent conversion to any type of packet frame
No packet length limitation
Provides LEDs for easy network monitoring
Center chassis installation : support installation in a
center chassis rack with benefits of central software
management, central power and redundant power
backup.
center chassis rack with benefits of central software
management, central power and redundant power
backup.
Diversified mounting support : desktop mounting, wall
mounting, optional Din-Rail support
mounting, optional Din-Rail support
Support wide range of single mode fiber options: short
reach up to long reach, Bi-directional single fiber, and
CWDM
reach up to long reach, Bi-directional single fiber, and
CWDM
Low power consumption
Specifications
Fiber Optic Interfaces (SFP-A & SFP-B Ports)
Compliance
Compliance
IEEE 802.3z 1000BASE-SX/LX std.
IEEE 802.3u 100BASE-FX std.
IEEE 802.3u 100BASE-FX std.
Connectors
SFP for pluggable fiber transceiver
Data Speed
1000Mbps, full duplex (SW1-3: Off)
100Mbps. full duplex (SW1-3: On)
100Mbps. full duplex (SW1-3: On)
Cable Types
SFP-A MMF - 50/125, 62.5/125
µ
m
SFP-B SMF - 9/125
µ
m
Eye Safety compliance IEC825 Class 1
Center Interface
Interface
Interface
For center chassis mounting
Connector
FutureBus
DC Power Input
Interface
Interface
DC Jack (-D6.3mm/+D2.0mm)
Operating Voltages
DC input +5V ~ +12V
Power consumption
max 2W @+7.5VDC input
SW (Configuration Switches)
SW1
SW1
ON - Gigabit Ethernet MM to SM
OFF - Fast Ethernet MM to SM
OFF - Fast Ethernet MM to SM
SW2 ~ SW5
Reserved
Mechanical
Dimension (base)
Dimension (base)
W 108mm x D 72.5mm x H 23mm
Housing
Enclosed metal with no fan
Weight
206g
LED Indicators
PWR
PWR
ON
Power on
OFF
Power off
GE/FE
ON
GE MM to GE SM
OFF
FE MM to FE SM
SFP-A OL
ON
SFP-A port optical signal detected
OFF
No optical signal
SFP-B OL
ON
SFP-B port optical signal detected
OFF
No optical signal
Environmental
Operating Temperature -5
Operating Temperature -5
~ 55
o
C
Storage Temperature
-20
~ 85
o
C
Relative Humidity
10% ~ 70%
Design Compliance
FCC Part 15 Class B, CE / CISPR 22 Class B, IEC60950 Safety
FCC Part 15 Class B, CE / CISPR 22 Class B, IEC60950 Safety
Desktop Mounting
The device can be mounted on a desktop or shelf. Make sure
that there is proper heat dissipation from and adequate venti-
lation around the device. Do not place heavy objects on the
device.
that there is proper heat dissipation from and adequate venti-
lation around the device. Do not place heavy objects on the
device.
Wall Mounting
The device provides a mounting hole on the bottom case as
shown in the figure. Use the hole for a wall mounting.
shown in the figure. Use the hole for a wall mounting.
1
2
4
3
Multimode to Single Mode
Optical Fiber Media Converters
KGC-311 Series
Installation Guide
DOC.070808-KGC311