Kenwood DNX691HD 说明手册
106
106
AV Output Interface Setup
You can select an AV source to be output at
the AV OUTPUT port. Default is “VIDEO1”.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
SETUP Menu screen appears.
3
Touch [AV-OUT].
AV-OUT Interface screen appears.
4
Touch [
2] or [3] to set [AV-OUT] to
VIDEO1, DISC, iPod, USB, or OFF.
NOTE
• Only when iPod is connected to this unit with
KCA-iP202, “USB” can be selected as AV output
source. For the connection setting, refer to
source. For the connection setting, refer to
.
External Device Control
(DNX891HD, DNX7710BT only)
Control the external device power supply.
1
Touch [EXT SW] in the Source Control
screen.
screen.
EXT SW Control screen appears.
NOTE
• If [EXT SW] is not displayed, touch [
].
2
Touch the desired switch key.
You can turn on or off the external device
You can turn on or off the external device
power supply.
NOTE
• You must connect a commercially available relay
unit in order to use this function. Connect the
external device to be controlled to that relay unit.
external device to be controlled to that relay unit.
• See
for information on
setting the power on or off specification.