Kenmore Washer 796.4147 用户手册

23

Use this option to disable the controls. The 

washer can only be locked during a cycle. 

This feature can prevent children from 

changing cycles or operating the machine. 

Once set, the controls remain locked and 

must be turned OFF before the controls can be used again. 

Once the washer has shut off, the power button will allow 

the machine to be turned ON, but the controls will still be 

locked. When the controls are locked, the STAY FRESH LED 

will illuminate and “CL” will display alternately with the 

estimated time remaining. 
Press and hold the STAY FRESH button for five seconds to 

activate or deactivate the controls.

Detergent residue can build up in the wash 

drum over time and can lead to a mildewy 

or musty smell. The CLEAN WASHER cycle is 

specially designed to remove this buildup 

using bleach or another cleaner designed specifically for 

cleaning front load washers. Run the CLEAN WASHER cycle 

once a month, or more often under heavy use conditions or if 

odor is present. See complete instructions in the CARE AND 

CLEANING section.

Turn ON the washer and press and hold the ACCELA-

WASH button for three seconds. Selecting any other 

cycle after CLEAN WASHER has been selected will 

cause the CLEAN WASHER cycle to be cancelled.
Fill the bleach dispenser to the MAX line with liquid 

chlorine bleach. Do not overfill the bleach dispenser. 

Overfilling will cause the bleach to dispense immediately.

       NOTE: For other drum cleaning products, follow    

       the cleaner manufacturer’s instructions and     

          

       recommendations. For powdered cleaning products,      

       add the cleaner to the main wash compartment of    

       the dispenser drawer. Place tablet cleaners directly   

       into the drum. 

Press the START/PAUSE button to start the cycle.

        After the cycle has ended, secure the door slightly ajar  

        with the door magnet. This will promote air circulation  

        and allow the interior of the machine to dry. To use this  

        feature, close the door just until it contacts the door  

        magnet.

NOTE: Do NOT use this cycle with clothes, and do 

NOT add detergent or fabric softener.

MY CYCLE allows you to store a customized 

wash cycle for future use. It allows you to 

save favorite temperature, spin speed, soil 

level, and other options for a cycle, and 

then recall them at the touch of a button.
NOTE: You can only save a setting for one cycle at a 

time. Pressing and holding the MY CYCLE button will 

overwrite any previously saved cycle.
To save a MY CYCLE:

    Press the POWER button to turn on the washer.

    Turn the cycle selector knob to select the desired cycle.

    Press the CYCLE MODIFIER button to change the desired setting.

    Press the CYCLE OPTION button to add the desired options.

    Press and hold the MY CYCLE button.

To recall a MY CYCLE: 
    Press the POWER button to turn on the washer.

    Press the MY CYCLE button. The stored settings will be              

    displayed.

    Press the START/PAUSE button to start the cycle. 

NOTE: MY CYCLE can be adjusted the same as any 

other cycle. However, once any other button is pressed, 

the LED will turn off indicating that the settings are no 

longer those of your saved cycle.

Use the AUTO SOAK option to presoak 

garments to help remove difficult spots or 

stains on fabric. This option provides a 30 

minute presoak prior to the start of the 

selected cycle. At the end of the presoak 

time, the selected cycle will use the same water. 
To use the AUTO SOAK feature, press and hold the  

STEAM TREAT button for three seconds.

This option saves energy by using cooler 

water while increasing the wash and rinse 

times to maintain wash performance. This 

feature is only available with the  NORMAL 

and HEAVY DUTY cycles as listed below. 

To use the Save Energy option, press and hold the Pre Wash 

button for three seconds. 

• NORMAL – Hot becomes Cold

• NORMAL – Cold becomes Tap Cold

• HEAVY DUTY – Hot becomes Cold