Johnson Controls Inc. Pet Fence S1-HDSTACK01 产品宣传页
ACCESSORY KIT INSTALLATION MANUAL
S1-HDSTACK01 - STACKING RACK
FOR USE WITH MODELS TCHD / YCHD
IN STAL LA TION
2 ½" MIN I MUM EMBEDMENT
A. 2 ½" MIN I MUM EMBEDMENT
B. 3 ½" MIN I MUM EMBEDMENT
B. 3 ½" MIN I MUM EMBEDMENT
STEEL STUD WALL
1.
This kit is designed to stack two horizontal discharge
units. It will handle both sizes of horizontal discharge
unit foot print.
units. It will handle both sizes of horizontal discharge
unit foot print.
2.
The stacking kit must be assembled and anchored
securely before any horizontal discharge units are
placed on the stacking frame.
securely before any horizontal discharge units are
placed on the stacking frame.
3.
Horizontal discharge units should be mounted so that
the front of the units are closest to the front edge of the
stacking frame. This will allow proper air circulation
around the back of the unit.
the front of the units are closest to the front edge of the
stacking frame. This will allow proper air circulation
around the back of the unit.
4.
See hardware details for proper location of bolts, nuts,
and washers.
and washers.
NOTE - ALL ANCHORING HARDWARE IS FIELD SUPPLIED
CONCRETE WALL
A. SOLID GROUTED
MINIMUM (2) 3/8" Ø HILTI KWIK BOLTS III
B. HOLLOW CELL
(2) 3/8" Ø ALL THREAD IN HILTI HIT HY-20
EPOXY
EPOXY
TOP SHELF
MINIMUM (2) 3/8" Ø HILTI KWIK BOLTS III
TOP SHELF
MINIMUM (6) #10 SMS
TOP SHELF
18 GAUGE MINIMUM
18 GAUGE BLOCKING W/ (2) #8 SMS
EACH END AS NEEDED
EACH END AS NEEDED
CONCRETE BLOCK WALL
CONCRETE PLATFORM
2 ½" MIN I MUM EMBEDMENT
MIN I MUM (2 EACH FLANGE) 3/8" Ø HILTI KWIK BOLTS III
3" TYP FLANGE W/(2) 7/16" Ø HOLES FOR
ANCHORING TO CONCRETE PLATFORM
(TYP OPPOSITE SIDE)
ANCHORING TO CONCRETE PLATFORM
(TYP OPPOSITE SIDE)
STACKING RACK
(5) 7/16" Ø HOLES FOR CONNECTING TO WALL
(EXCEPT FOR STEEL ATTACHMENT)
(EXCEPT FOR STEEL ATTACHMENT)
CON CRETE PLATFORM
WOOD STUD WALL
TOP SHELF
MINIMUM (5) 3/8" Ø LAG BOLTS
4X BLOCKING CONTINUOUS
3" MIN I MUM EMBEDMENT
Johnson Controls Unitary Products
433082-UAI-A-0112