Jensen Tools DV1628 用户手册
1
1
DV1628
Owner's Manual
Thank you!
Thank you for choosing a JENSEN product. We ve tried to make the
instructions in this owner s manual clear and easy to follow. If you take a few
minutes to look through it, you ll learn how to use all of the features of your
new JENSEN AM/FM/CD/DVD player for maximum enjoyment.
instructions in this owner s manual clear and easy to follow. If you take a few
minutes to look through it, you ll learn how to use all of the features of your
new JENSEN AM/FM/CD/DVD player for maximum enjoyment.
Installation:
Getting Started.
It is a good idea to read all of the instructions before you begin the
installation.
installation.
Tools and supplies needed:
•
Flat and Phillips screwdrivers
•
Wire cutters and strippers
•
Tools to remove existing radio
•
Electrical tape
•
Crimping tool
•
Volt meter/ Test light
•
Crimp connections
•
Speaker Requirements: Only connect speakers rated in the load
impedance range of 4 Ohms. Speakers with a load impedance less
than 4 Ohms could damage the unit
impedance range of 4 Ohms. Speakers with a load impedance less
than 4 Ohms could damage the unit
1. Prepare:
•
Disconnect battery. Before you begin always disconnect the
battery s negative terminal
battery s negative terminal
2. Mounting angle:
•
Do not exceed a 30¡ mounting angle. Improper operation of the
unit could occur if the mounting angle is exceeded.
unit could occur if the mounting angle is exceeded.
3. Removal of factory radio or DV1628:
3 0
Installation...........................................................................................1
T roubleshooting..................................................................................3
Operation.............................................................................................4
Specifications......................................................................................16
Warranty.............................................................................................17
T roubleshooting..................................................................................3
Operation.............................................................................................4
Specifications......................................................................................16
Warranty.............................................................................................17