JAI TM-1020 用户手册

For optimal performance, JAI, Inc. recommends using a cooling fan to set up a positive air flow around 
the camera and following the precautions below.

Mount the camera on a large heat sink (camera bracket) made out of conductive material like alu-

minum. 

Make sure the flow of heat from the camera case to the bracket is not blocked by a non-conductive 

material like plastic. 

Make sure the camera has enough open space around it to facilitate the free flow of air.

Please contact JAI, Inc. at (800) 445-5444 or send an email to imaging@jai.com if you have any 
questions. 

The TM-1020 series has a 12-pin Hirose connector for power input, 
serial communication, and signal integration. Pin #1 is Ground and 
Pin #2 is +12V DC. Other pins handle a number of input and output 
functions, as shown in Table 1 below. 

1

GND (power)

7

VD In

2

+12V DC

8

Strobe Out

3

GND (analog)

9

HD In

4

Video Out

10

RXD (RS-232)

5

GND (digital)

11

Integration Control

6

VINIT In

12

TXD (RS-232)