JAI TM-1020 用户手册
Page 34
TM-1020 Series Progressive Scan Shutter Cameras
TM-1020 Series Progressive Scan Shutter Cameras
LVDS-Version Camera RS-232 Commands
4
LVDS-Version Camera RS-232 Commands
The LVDS-version camera can be controlled via RS-232 commands. The Start character is always “:”
and the end character is always “CR” (return). For example, to set Asynchronous Pulse Width Mode,
send the command :SA9”CR” to the camera. The following table contains RS-232 commands that can
be used to control the camera.
and the end character is always “CR” (return). For example, to set Asynchronous Pulse Width Mode,
send the command :SA9”CR” to the camera. The following table contains RS-232 commands that can
be used to control the camera.
TABLE 7.
RS-232 Command List
First
Character
Second
Character
Third
Character
Response
Functions
1
“S” (shutter)
“M” (Manual)
“0” - “9”
Mode
Mode
ACK
Manual Shutter Mode
“A” (ASYNC)
“0” - “8”
Mode
Mode
ACK
Async Shutter Mode
“9” (Pulse
Width Mode)
Width Mode)
ACK
Async Pulse Width Mode
2
“G” (Gain)
“M”
“00” - “FF”
ACK
Gain Control
3
“V” (A/D Vref)
“T” (Top)
“00” - “FF”
ACK
Vtop reference setting
“B” (Bottom)
“00” - “FF”
ACK
Vbtm reference setting
4
“W” (Write)
“P” (Page)
“0” - “6”
ACK
Write current setting to Page
EEPROM
EEPROM
“U” (User)
“A” - “D”
ACK
Write current setting to User
EEPROM
EEPROM
“S” (System)
“A” - “D”
ACK
Write current setting to System
EEPROM
EEPROM
5
“L”
“P” (Page)
“0” - “6”
ACK
Restore setting from Page
EEPROM
EEPROM
“U” (User)
“A” - “D”
ACK
Restore setting from User
EEPROM
EEPROM
“S” (System)
“A” - “D”
ACK
Restore setting from System
EEPROM
EEPROM
“N” (kNee)
“0” - “9”
ACK
Load Preset Knee Table
6
“R” (Report)
“P” (Page)
“0” - “6”
ACK
ACK + “P” + (“9” - “F”) + 16
bytes
bytes
“U” (User)
“A” - “D”
ACK
ACK + “U” + (“A” - “D”) + 6
bytes
bytes
“S” (System)
“A” - “D”
ACK
ACK + “S” + (“A” - “D”) + (6
bytes)
bytes)
“R” (Current)
ACK
ACK + “RR” + 16 bytes
“X” (Execute)
ACK
Set Camera with loaded data
“D” (Date)
info
Report CPU program version