MTD Series 020 用户手册

Grasp bag handle with one hand and slide locking 
rod on mounting bracket with other hand toward 
engine. Use the end of mounting bracket as leverage 
when sliding the locking rod.
Slip bag over the rim of the discharge opening and 
release locking rod to secure bag in place. See 
Figure 3-5.
Snap bag clip to the top of the lower handle.
Place lower straps on the bag over the top of lower 
handle, hooking them on the studs. See Figure 3-6.

NOTE: The bag/chute switch button attached to the 
mounting bracket must be fully depressed by the tip of 
front tab on bag handle when securing the bag or engine 
will not start.

1.

2.

3.
4.

Figure 3-5

Figure 3-6

NOTE: 

The bag/chute 

switch button attached to 
the mounting bracket must 
be fully depressed by the 
tip of front tab on the blower 
chute or engine will not 
start.