MiTAC 8170 用户手册
88
8170 N/B MAINTENANCE
Figure 2-4 Remove three Screws
Figure 2-5 Remove keyboard
Reassembly
1. Reconnect the keyboard cable and fit the keyboard back into place.
2. Replace the LED panel.
2. Replace the LED panel.
3. Remove three screws fastening keyboard on the base unit cover. (Figure 2-4)
4. Slightly lift up the keyboard and disconnect the cable from the system board to detach the keyboard. (Figure 2-5)
4. Slightly lift up the keyboard and disconnect the cable from the system board to detach the keyboard. (Figure 2-5)