Mitsubishi Electronics Mitsubishi Digital Electronics Portable Multimedia Player GOT1000 用户手册
21 - 2
21. MULTI-CHANNEL FUNCTION
21.1 What is Multi-channel Function?
21.1 What is Multi-channel Function?
21. MULTI-CHANNEL FUNCTION
21.1 What is Multi-channel Function?
Multi-channel Function is a function to monitor up to four FA controllers (PLC CPU, temperature controller, inverter, etc.)
on one GOT by writing multiple communication drivers in the GOT.
(For GT155 , up to two controllers (two channels))
on one GOT by writing multiple communication drivers in the GOT.
(For GT155 , up to two controllers (two channels))
POINT
POINT
POINT
(1) Before using the multi-channel function
This manual describes the procedure to use the multi-channel function, based on the following system
configuration example.
configuration example.
(2) System configuration when the multi-channel function is used
The system configuration between GOT and the controllers is the same as that of when not using the multi-
channel function.
For the system configuration between GOT and the controllers, refer to the following.
channel function.
For the system configuration between GOT and the controllers, refer to the following.
Each chapter indicating the system configuration
(3) Precautions for hardware
To use the multi-channel function, an option function board is required for some GOTs.
The following table shows the required option function boards.
The following table shows the required option function boards.
Channel No.1
Channel No.2
Channel No.3
Channel No.4
Installing multiple
communication drivers
communication drivers
Bus connection
OMRON PLC
connection
connection
Temperature
controller
connection
Servo amplifier
connection
Monitoring the devices
of FA controllers
GOT
Option function board
GT16, GT12
Not necessary
GT15
GT15-QFNB, GT15-QFNB16M, GT15-QFNB32M,
GT15-QFNB48M, GT15-MESB48M
GT15-QFNB48M, GT15-MESB48M
GT14
Not necessary