Microsoft ES4612 用户手册
Configuring the Switch
3-226
3
Web - Click Routing Protocol, OSPF, General Configuration. Enable OSPF, specify
the Router ID, configure the other global parameters as required, and click Apply.
the Router ID, configure the other global parameters as required, and click Apply.
Figure 3-131 OSPF General Configuration
CLI - This example configures the router with the same settings as shown in the
screen capture for the web interface.
screen capture for the web interface.
Console(config)#router ospf
Console(config-router)#router-id 10.1.1.253
Console(config-router)#no compatible rfc1583
Console(config-router)#default-information originate always
metric 10 metric-type 2
Console(config-router)#timers spf 10
Console(config-router)#