Cirkuit Planet MH-2001 用户手册

MH-2001 Multi-Homing Security Gateway User’s Manual 

Connect the Administrator’s PC and the LAN port of MH-2001 to a hub or switch. Make sure there is a link 

light on the hub/switch for both connections. MH-2001 has an embedded web server used for management 

and configuration. Use a web browser to display the configurations of MH-2001 (such as Internet Explorer 

4(or above) or Netscape 4.0(or above) with full java script support). The default IP address of MH-2001 is 

192.168.1.1 with a subnet mask of 255.255.255.0. Therefore, the IP address of the Administrator PC must be 

in the range between 192.168.1.2– 192.168.1.254 

If the company’s LAN IP Address is not subnet of 192.168.1.0, (i.e. LAN IP Address is 172.16.0.1), then the 

Administrator must change his/her PC IP address to be within the same range of the LAN subnet.    Reboot 

the PC if necessary. 

By default, MH-2001 is shipped with its DHCP Server function enabled. This means the client computers on 

the LAN network including the Administrator PC can set their TCP/IP settings to automatically obtain an IP 

address from the device.     

The following table is a list of private IP addresses. These addresses may not be used as a WAN IP address. 

10.0.0.0 ~ 10.255.255.255 

172.16.0.0 ~ 172.31.255.255 

192.168.0.0 ~ 192.168.255.255   

Once the Administrator PC has an IP address on the same network as the Multi-Homing Security Gateway, 

open up an Internet web browser and type in 

 in the address bar. 

A pop-up screen will appear and prompt for a username and password. A username and password is required 

to connect to MH-2001. Enter the default login username and password of Administrator (see below).   

Click OK. 

 

 

 

 

 

 

 

 

 

 

- 8 -