Cirkuit Planet MH-2001 用户手册

MH-2001 Multi-Homing Security Gateway User’s Manual 

In this section, the Administrator can set up the IP addresses for the office network. The Administrator may 

configure the IP addresses of the LAN network, the WAN 1/2 network, and the DMZ network. The netmask 

and gateway IP addresses are also configured in this section. 

Click on Interface in the left menu bar. Then click on LAN  below it. The current settings of the interface 

addresses will appear on the screen.   

 

Using the LAN Interface, the Administrator sets up the LAN network. The LAN network will use a private IP 

scheme. The private IP network will not be routable on the Internet. 

IP Address: The private IP address of MH-2001 LAN network is the IP address of the LAN port of the device. 

The default IP address is 192.168.1.1. If the new LAN IP Address is not 192.168.1.1, the Administrator needs 

to set the IP Address on the computer to be on the same subnet as MH-2001 and restart the System to make 

the new IP address effective. For example, if MH-2001’s new LAN IP Address is 172.16.0.1, then enter the 

new LAN IP Address 172.16.0.1 in the URL field of browser to connect to MH-2001. 

NetMask: This is the subnet mask of the LAN network. The default netmask of the device is 255.255.255.0.   

Ping: Select this to allow the LAN network to ping the IP Address of MH-2001. If set to enable, the device will 

respond to ping packets from the LAN network. 

HTTP: Select this to allow the device WEBUI to be accessed from the LAN network.   

 

Do not cancel WebUI selection before not setting Permitted IPs yet. It will cause the Administrator 

cannot be allowed to enter the MH-2001’s WebUI from LAN. 

 

 

 

 

- 34 -