Maretron DCM100 用户手册

 

Page 2  

When unpacking the box containing the Maretron DCM100, you should find the following 
items: 
 
1 – DCM100 – DC Monitor 
1 – DC Current Sensor with 5 ft. long cable (Part # LEMHTA200-S) (outer cable covering grey) 
1 – Battery Temperature Sensor with 5 ft. long cable (Part # TR3K) (outer cable covering grey) 
1 – Battery Voltage Sense Cable, 5 ft. long (Part # FC01) (outer cable covering white ) 
1 – Power Cable, 5 ft. long (Part # FC01) (outer cable covering white) 
1 – Parts Bag containing 4 Stainless Steel Mounting Screws 
1 – DCM100 User’s Manual 
1 – Warranty Registration Card 
 
If any of these items are missing or damaged, please contact Maretron. 
 

The DCM100 should be mounted near the monitored source of DC power. Please consider the 
following when choosing a mounting location. 
 

1.  The DCM100 is waterproof, so it can be mounted in a damp or dry location.  
2.  The orientation is not important, so the DCM100 can be mounted on a horizontal deck, 

vertical bulkhead, or even upside down if desired. 

3.   The DCM100 is temperature rated to 55°C (130°F), so it should be mounted away from 

engines or engine rooms where the operating temperature exceeds the specified limit.