Lumens Technology PC120 用户手册
English - 49
Chapter 10 Troubleshooting
This chapter describes problems you may encounter while using PC120. If you
have questions, please refer to related chapters and follow all the suggested
solutions. If the problem still occurred, please contact our distributors or service
center.
No.
Problems
Solutions
1
Boot without power
signal
signal
Ensure that the USB cable is connected.
2
Unable to focus
Probably the document is too close. Pull away the
distance between document and lens, then click
[FOCUS].
distance between document and lens, then click
[FOCUS].
3
PC120 cannot
operate normally
operate normally
Probably the machine cannot operate normally due to
that the power supply of the USB port at the front end of
the computer is insufficient. Try to connect to a USB port
at the rear end or a USB hub with a power adapter.
that the power supply of the USB port at the front end of
the computer is insufficient. Try to connect to a USB port
at the rear end or a USB hub with a power adapter.
4
Cannot identify
PC120
PC120
Outdated or incomplete OS versions might not be able to
identify USB devices like PC120. Please use Windows
XP SP2 or newer versions that are compatible.
identify USB devices like PC120. Please use Windows
XP SP2 or newer versions that are compatible.
5
Output screen is
flickering
flickering
By default, the voltage/frequency value of Podium View
TM
is 60Hz. If voltage/frequency of 50Hz is required in your
country, flickering of screen may occur when the Podium
View
country, flickering of screen may occur when the Podium
View
TM
is used. Please refer to
6.1.3 and 6.2.5
Camera
Settings of
Chap 6 Function Menu
to change the
POWER frequency setting to 50Hz.
6
Digital Zoom is
disabled
disabled
Please click Options to make sure whether
Software Mode is on Annotation Mode. For details,
please refer to
Software Mode is on Annotation Mode. For details,
please refer to
6.1.4 Options of
Chap 6 Function
Menu
.