LOEWE Viewvision DR+DVB-T 用户手册

下载
页码 71
9 -  
Audio Menu
Each DVD disc offers a variety of audio formats. Set the audio format for the 
recorder according to the type of audio system you are using.
Dolby Digital / DTS / MPEG
 
PCM  Select this option if the unit is connected to a digital two 
channel stereo amplifier. The DVD recorder‘s digital audio 
outputs emit sound in PCM  channel format if you play a 
DVD-Video disc with Dolby Digital audio format.
 
Bitstream   Select Bitstream if you have a Dolby Digital decoder (or 
amplifier, a Loewe TV with AC or DIS module or another unit 
with Dolby Digital decoder) connected to the DIGITAL OUT 
socket of the DVD recorder.
 
OFF   If you select OFF the DTS signal is not emitted from the 
DIGITAL OUT socket. 
Sampling Frequency
If your receiver or amplifier is NOT designed for 96 kHz signals, select 48 kHz. If 
you have made this selection, the unit automatically converts the 96 kHz signals to 
48 kHz signals that the system can decode. If your receiver or amplifier is designed 
for 96 kHz signals, select 96 kHz.
Night Mode (DRC)
Thanks to digital audio technology the DVD format enables you to hear soundtracks 
in the most accurate and realistic way possible. However, you may wish to limit 
the dynamics (i.e. the difference between the loudest and the quietest sounds). In 
this way you can play a film with minimum volume differences. For this purpose 
switch DRC to ON.
OK
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
OFF
ON
 Prev.
 Select
Move
Karaoke Audio (Vocal)
Switch the singing option (Vocal) on, if you want to play a multi-channel karaoke 
DVD. The karaoke channels on the disc are mixed into normal stereo sound.
Lock Menu
Set Password
 
Lock System
DVD Rating
DTV Rating
Set Password
Area Code
DivX Reg. Code
Change
Delete
 Prev.
0-9
 Input
New Password
OK
Call menu.
5
 6 Select symbol   Lock.
4
 Call second level. 
5
 6 Select Set Password.
4
 Call third level.
If you have not yet entered a password
Enter a four-digit number with number buttons.
Confirm with OK.
Enter password to check.
Confirm with OK.
If you have already entered a password
Select Change.
Confirm with OK.
Enter current password.
Confirm with OK.
Then enter a new four-digit password.
Confirm with OK.
Enter password to check.
Confirm with OK.
 
If you make a mistake, press 3repeatedly before you press OK to delete or 
correct the password numbers one after another.
Initial Installation