Liebert Universal Monitor 用户手册

The Service Terminal Interface offers two additional options for pager setup, which are not available 

through the LCD interface:

• Enable communications check
• Enter time to perform communications check

To access these options:

• Connect to the Universal Monitor either from a remote computer or through the RS232 port (see 

• At the Main Menu, enter 0 (zero—Setup System-Login Required).
• At the Login Menu, enter your password.
• At the Setup Menu, enter 6 (Setup Modem&Pagers).
• At the Setup Modem & Pagers menu, shown below, enter a number (1-4) to select a pager.

• At the Enter Pager Number prompt, you may press Enter to bypass this option (or see 9.8.3 - 

Pager Setup - Pager Number and PIN for instructions on entering the pager number).

• At the Enter Pager PIN Number prompt, you may press Enter to bypass this option (or see 9.8.3 - 

Pager Setup - Pager Number and PIN for instructions on entering the pager PIN).

SETUP MODEM&PAGERS

Input pager and
modem information

Select pager or modem

CURRENT NUMBER

*******************

1=PAGER NUMBER 1

An "A" is required

2=PAGER NUMBER 2

as 1st character

3=PAGER NUMBER 3

for an alpha pager,

4=PAGER NUMBER 4

an "N" for a numeric

5=MODEM CONFIGURATION

pager, and an "M"

6=RETURN TO SETUP MENU

for a remote modem.

7=RETURN TO MAIN MENU

*******************

SELECT A NUMBER:1

>ENTER PAGER NUMBER(40 CHARACTERS MAX).
>[]
>[
>COMMAND SUCCESSFUL

>ENTER PAGER PIN NUMBER (20 CHARACTERS MAX).
>[]
>[
>COMMAND SUCCESSFUL