iON iAEG04 用户手册

Guitar Features

Guitar Audio output: Sends audio from
guitar to the amplifier.

Bridge Assembly: Contains Pegs for
holding strings and bridge.

Sound Hole: This is where the acoustic
sound exits the guitar.

Frets: Raised bars on the neck of the
guitar that designate where the strings

should be pressed to change the sound of
the string.

Neck: Surface that the strings are

stretched across to allow for pressing the
strings.

Tuning Keys: Rotate these knobs to
tune/adjust the pitch of its corresponding

string.

Headstock: Houses the keys for tuning

and winding the strings.

Control Module: Houses the on-board

electronic controls.

EQ Controls: Adjust the BASS, MID, and

TREBLE output pre-amplifier.

10. Volume Output: Controls the volume

output pre-amplifier.

11. Battery Compartment: Use a 9V

battery to power the on-board electronic

controls.

Step 1: Use the pitch pipe, starting with 6E,

match the pitch with the 6E string. To adjust
the string pitch, simply turn the Corresponding

key on the headstock. (See the Pitch-Pipe
Configuration diagram above)

Follow this same procedure to tune all the

strings on your guitar.

Step 2: After tuning your guitar using the pitch
pipe, you may want to use this optional second
method to fine-tune your guitar, ensuring that

the strings are in tune with each other.

To do this, start by tuning the 5A string to the
6E string by pressing down on the 6E string in

between the 4

and 5

frets. This will give you

the correct pitch of the 5A string. You can then

rotate the 5A key on the headstock until the
strings sound the same.

From there you can use the same method to

tune the other strings with the exception to
tuning the B2 string. Press down on the 3G

string in between the 3

and 4

, instead of the

and 5

frets, to get the correct pitch for the

2B string. (See the Tuning Your Guitar

diagram above)

1st

2nd

3rd

4th

5th

5A 4D 3G

Pitch-Pipe Configuration

Tuning Your Guitar