Intermec Technologies Scanner SF51 用户手册

The SF51 has a linear imager you can use to scan and enter bar 
code data. The linear imager can decode 1D and 2D stacked bar 
codes. When you unpack the SF51, these bar code symbologies 
are enabled:  

•  Code 39 

•  Code 128 / EAN 128 

•  PDF417 (only available on the SF51 with PDF version)  

•  UPC/EAN 

If you are using bar code labels that are encoded in a different 
symbology, you need to enable the symbology on the SF51. Use 
EasySet version 5.2 or later to enable and disable symbologies for 
your scanner. EasySet is available on the CD that ships with the 
SF51, or you can download it at no charge from the Intermec 
web site at www.intermec.com.  

Establish a Bluetooth connection between the SF51 and your 
host device. For more information about establishing a 
Bluetooth connection, see “Connecting the SF51 to a Host 
Device” on page 16. 

Point the SF51 at the bar code label and hold the SF51 at a 
slight angle 15 to 25 cm (6 to 10 in) from the label.  

Press the Scan button. The scanner beam turns on. Scan this 
test bar code: 

Code 39 Test Bar Code 

 

*123456* 

 *123456* 

Tip: Depending on your screen resolution, you may be able 
to scan bar codes displayed on your computer screen. 

If you are scanning a 1D bar code, direct the red scanner 
beam so that it falls across all bars in the bar code label.