Intermec Technologies Scanner SF51 用户手册

Use Beep Frequency in combination with Beep Volume and 
Good Read Beep Duration to define beeps according to operator 
preference and work environment. 

Adjusts the volume of the beeps. You can set Beep Volume to 
Low, Medium, or High.  

 

Note: To turn off the beeper, you set the Beep 
Duration to 0. Turning off the beeper does not 
affect the beeps associated with Bluetooth 
Connect/Disconnect or Bluetooth Device Page. 

Use Beep Volume in combination with Beep Frequency and 
Good Read Beep Duration to define beeps according to operator 
preference and work environment. 

Connects or disconnects Bluetooth communications between 
the SF51 and host computer if you are using Serial port profile.  

To connect to a host computer, enter the Bluetooth address  
of the computer and scan the bar code with the SF51. To 
disconnect, scan the disconnect bar code. 

Sets the name of the scanner. If the scanner is in a discoverable 
state, its Bluetooth device name is available to host computers 
during device discovery.  

If your SF51 is within Bluetooth communication range of your 
host PC, you can send this command from EasySet to locate the 
SF51. For help, see “Locating the SF51” on page 28.