Intermec 751G 用户手册

Align the folded edge of the pull tab where there is no adhesive with the 
bottom end of the storage card. Peel away the rest of the paper from the 
long end, then firmly press down the remaining adhesive area of the tab 
onto the storage card.

Insert the storage card, with the contacts facing the keypad, into your 
751G to ensure that no adhesive is exposed once the tab is placed.

Press on the storage card until you hear a click. If needed, close the 
storage media access door.

When inserted in the 751G, the Secure Digital card inserted in your 751G, 
it appears as the “\SDMMC Disk” folder. To access this folder, select My 
Computer, then tap the “\SDMMC Disk” folder. 

Press the Power key for seconds, and then release the Power key to turn 
off the 751G. Remove the storage media access door.

Gently depress the Secure Digital card to release the card, then pull the 
card from its slot.

Replace the storage media access door.

Press the Power key for two to three seconds, and then release the Power 
key to turn on the 751G.

Radios are installed at the factory and cannot be installed by a user. The 
751G must be serviced to install or replace radios. Contact your Intermec 
representative for more information. See 

 

for information about supported radios.

Note: Changes or modifications not expressly approved by Intermec could 
void the user’s authority to operate the equipment.

Align the folded end with this edge of the storage card

Keypad facing down