Intermec 751G 用户手册

You can configure many parameters on the 751G, such as the bar code 
symbologies it decodes or the network settings. These characteristics are 
controlled by configuration parameters. The values you set for these 
configuration parameters determine how the computer operates. Use 
configuration commands to configure the 751G.

Use the Intermec Settings applet to configure the 751G and view system 
information. You can access the Intermec Settings applet while running any 
application.

For detailed information on most of the commands available in the 
Intermec Settings applet, see the Intermec Computer Command Reference 
Manual (P/N 073529) via the Intermec web site. Go to 

It is important that the time on all of your 751Gs be synchronized with a 
network time server to ensure real-time communications and updates. 
Network time servers acquire Coordinated Universal Time (UTC) from an 
outside source such as the U.S. Naval Observatory (USNO). The 751G 
uses Simple Network Time Protocol (SNTP) to synchronize with a 
network time server.

The default reference time server is the USNO (tock.usno.navy.mil). To 
synchronize the time on your 751G with this time server, you must have a 
valid connection to the Internet. You can also synchronize the 751G system 
time with a corporate network server within your firewall that is SNTP-
capable. To use an internal corporate network server, you need to set the 
command name in the registry.

From the 751G desktop, select Start > Settings > Control Panel, then 
double-tap the Intermec Settings icon.