Insignia NS-1DRVCR 用户手册

www.insignia-products.com

1 Make sure your digital camcorder is 

connected to the front panel DV IN jack. See 
“Recording from DV input” on page 21.

2 Make sure that the DV audio input is set 

correctly. You can choose between Audio 1 
(original audio) and Audio 2 (overdubbed 
audio).

•

DV Input is set from the DV Record Audio 
in sub-menu of the Setup menu. See 
“Recording from DV input” on page 21 for 
more information.

3 Press INPUT repeatedly to select the DV 

input.

4 Find the place on the camcorder tape that 

you want to the recording to start from.

For best results, pause playback at the point 
you want to start recording from

.

•

Depending on your camcorder, you can 
use your recorder’s remote to control the 
camcorder using STOP, PLAY, 
BACKWARD, FORWARD and PAUSE.

5 Press  

REC once to start recording.

•

Recording is automatically stopped if the 
recorder detects no signal.

•

You can pause or stop the recording by 
pressing PAUSE/STEP  (

)  or  STOP 

(

). You cannot control the camcorder 

from this remote control during recording.

•

In Video mode, the final frame of the 
recording may remain displayed on 
screen for a while after recording stops.

If you cannot get a picture or audio through the 
DV IN jack, check the bullet points:
•

Make sure that the DV cable is correctly 
connected.

•

Try switching off the connected equipment 
then switching it back on.

•

Try switching the audio input.

Using the Title List menu you can edit video 
content. The editing features available in the 
Title List menu depend on whether you are 
editing video on DVD, and whether you are 
editing original content or a playlist.
There are two ways to edit VR mode DVD-RWs. 
You can directly edit the original content of the 
disc, or you can create and edit a playlist. The 
playlist does not actually change any of the 
content on the disc, but just controls how the 
content is played back.

1 If the DVD is playing, press STOP (

).

2 Press DISC MENU/LIST to open the TITLE 

LIST menu. Playback should be stopped 
when you do this.

•

When selecting titles, press the 

/

 

buttons to display the previous/next page 
if there are more than six titles.

•

If you are editing a VR mode disc, press 
DISC MENU/LIST to switch between 
Original and Playlist menus.

•

On the left side of the screen are the 
menu options. The main part of the 
screen shows thumbnails of the titles (or 
chapters) on the DVD. You can change 
these thumbnails by pressing the 
THUMBNAIL button. (see “Changing title 
thumbnails” on page 23.)

•

Press DISPLAY to display the information 
about the selected title on the Title List 
menu.

•

After selecting a title or chapter on the 
Title List or Chapter List menu, press 
ENTER. The menu options are on the left 
side of the menu. Press the 

/

 

buttons to select an option, then press 
ENTER to confirm your selection.

3 To exit the TITLE LIST menu, press RETURN 

(

) repeatedly.

•

The source signal must be DVC-SD format.

•

Some camcorders cannot be controlled using 
this recorder’s remote.

•

If you connect a second recorder using a DV 
cable, you cannot control the second DVD from 
this one.

•

You cannot control this unit remotely from a 
component connected to the DV IN jack.

•

You cannot record date and time information 
from a DV cassette.

•

Disconnecting the DV cable while recording a 
contents of the connected digital camcorder 
may result in malfunction.

Depending on the connected camcorder, you may 
not be able to control it using the remote control 
supplied with your recorder.

1

Currently 
selected title

The title that is currently selected is 
highlighted

2

Thumbnail

A thumbnail picture of the title

7

1

2

3

4

6

5