Intel SR1500AL 用户手册

26

Use the steps below if your system includes either the standard front bezel or the front 
bezel for the Intel

®

 Local Control Panel. The front bezel is optional. 

1. At each end of the bezel, line up the center notch on the bezel with the center guide 

on the rack handles.

2. Push the bezel onto the front of the server system until it clicks into place.

3. Connect any necessary cables to the front control panel area at the right side of the 

server system.

The server system must be operated with the system cover in place to ensure proper 
cooling. You will need to remove the top cover to add or replace components inside of the 
server. Before removing the chassis cover, power down the server and unplug all 
peripheral devices and the AC power cable(s). 

1. Observe the safety and ESD precautions at the beginning of this book. See 

“Safety 

Information”

. 

TP02200