Intel SR1500AL 用户手册

52

16. Install the server system cover. For instructions, see 

“Installing the System Cover”

. 

17. Plug all peripheral devices and the AC power cable(s) into the server.

The instructions below describe how to install and remove a PCI add-in card.

1. Observe the safety and ESD precautions at the beginning of this book. See 

“Safety 

Information”

. 

2. Power down the server and unplug all peripheral devices and the AC power 

cable(s). 

3. Remove the server system cover. For instructions, see 

“Removing the System 

Cover”

. 

4. Remove the processor air duct. For instructions, see 

“Removing the Processor Air 

Duct”

.

5. Remove the PCI riser assembly. For instructions, see 

“Removing the PCI Riser 

Assembly”

.

6. Open the rear retention clip by pushing the blue slide upward and rotating clip to 

the fully open position (see letter “A”).

7. Remove the filler panel from the selected add-in card slot (see letter “B”).

8. Insert add-in card until it seats in riser card connector (see letter “C”).

9. Close both retention clips. 

AF000361

A

B

C