Intel SR1500AL 用户手册

65

1. Observe the safety and ESD precautions in 

“Safety Information”

.

2. Turn off all peripheral devices connected to the server. Turn off the server.

3. Disconnect the AC power cord(s) from the server.

4. Remove the server's cover and locate the battery. See the documentation that came 

with your server chassis for instructions on removing the server's cover.

5. Insert the tip of a small flat bladed screwdriver, or an equivalent, under the tab in 

the plastic retainer. Gently push down on the screwdriver to lift the battery.

6. Remove the battery from its socket.

7. Dispose of the battery according to local ordinance.

8. Remove the new lithium battery from its package, and, being careful to observe the 

correct polarity, insert it in the battery socket.

9. Close the chassis.

10. Run Setup to restore the configuration settings to the RTC.

TP02079