Inetcam Mobile Gateway Draft version 1.7 用户手册
Draft version 1.7
13
Inetcam® and iMViewer™ are the property of Inetcam, Inc.
System Settings
The System Settings administration screen is used to change system-level settings.
The Network section is used to set the IP address settings of the Mobile Gateway™ video server.
• IP Settings: Select DHCP if the local network assigns IP addresses using a DHCP
server. Select Static to enter a fixed IP address that will not change. When using Static
IP settings, the IP Address, Subnet Mask, Gateway, and DNS Server 1 fields must be
filled in. DNS Server 2 is optional. These options may also be set using the Mobile
Gateway™ Finder utility.
IP settings, the IP Address, Subnet Mask, Gateway, and DNS Server 1 fields must be
filled in. DNS Server 2 is optional. These options may also be set using the Mobile
Gateway™ Finder utility.
The Time section is used to set the time on the Mobile Gateway™ video server. Accurate time
settings are important as this information is transmitted to viewing clients.
settings are important as this information is transmitted to viewing clients.
• Date: Enter the local date as "month/day/year" using numbers separated by slashes.
• Time: Enter the local time as "hour:minute:second" using numbers separated by colons.
• Time Zone: Select the local time zone from the dropdown list of time zones available to
• Time: Enter the local time as "hour:minute:second" using numbers separated by colons.
• Time Zone: Select the local time zone from the dropdown list of time zones available to
the Mobile Gateway™ video server.
• Use Daylight Savings: Select Yes or No to indicate whether or not Daylight Savings
Time should be followed. (Note: If the selected time zone does not use Daylight Savings,
such as Arizona time, the "Use Daylight Savings" setting is ignored.)
such as Arizona time, the "Use Daylight Savings" setting is ignored.)