Inetcam Mobile Gateway Draft version 1.7 用户手册

 

Draft version 1.7 

 

17 

 

Inetcam® and iMViewer™ are the property of Inetcam, Inc. 

 

Check the physical connections between the network card of the Mobile Gateway™ video server 
and the network/router. If the connections are secure, make sure the PC with the Finder utility 
loaded is on the same network subnet as the Mobile Gateway™. Once the machines are located 
on the same subnet, the Finder should locate the Mobile Gateway™. 

The username and password for this unit are case sensitive.  The default username for the 
Mobile Gateway™ is: Admin. The default password is: password. 

Check that the camera or DVR is connected correctly to the server with a BNC or RCA 
connection. All adaptors should fit snugly together. If a DVR connection is being used, confirm 
that the camera may be seen/previewed on the DVR as well.  

The account you are logged into does not have administrator access to that camera.  To add 
access to that camera, click the Access Control screen and then click edit next to your account 
information. Make sure the camera you wish to see has a check box for access next to it and click 
Apply. 

The Mobile Gateway™ does not support IP camera inputs at the current time. However, we are 
considering this for a future release. Please contact your Inetcam

®

 sales associate for more 

information or to request this as a feature. 

The Mobile Gateway™ Finder utility is designed to update the Mobile Gateway™ video server 
software while providing feedback for you on the process as it updates. If a problem occurs with 
the update, make a note of the item indicating a “FAILURE”: you will need this information when 
contacting Technical Support. Try logging into the unit’s administrative screens. If you are able to 
do this, go to the About Mobile Gateway™ screen and submit a diagnostic by following the 
instructions there. This will allow Technical Support to assess what the next steps are for you to 
apply the desired update. 

We recommend that you use the Mobile Gateway™ Finder utility to locate the Mobile Gateway™ 
video server. However, the unit is also defaulted to the IP: 192.168.93.93. To use this IP, the PC 
from which you are attempting to configure the unit will need to be on the same subnet.

 

 

We recommend that you use the Finder utility to configure the Mobile Gateway™ video server. 
Once the Finder utility is run, you will be able to set network settings directly from the Finder 
utility.  

To change the username or password on your Mobile Gateway™, login to the unit and click the 
Access Control screen. Click edit next to the account that you wish to modify (or click Add New 
User). Select your username and password and click Apply.