Inetcam Mobile Gateway Draft version 1.7 用户手册

 

Draft version 1.7 

 

4 

 

Inetcam® and iMViewer™ are the property of Inetcam, Inc. 

 

All of these items may be changed by opening a browser on a PC and going to the IP address of 
the Mobile Gateway™ video server by entering that address in the browser address bar (e.g. 
http://192.168.0.2.)  

 

For best results, hardware connections should be initiated in the following order: 

1.  Connect the network cable to the Mobile Gateway™ video server NIC. 

2.  Plug the cameras into the Mobile Gateway™ video server. 

3.  Connect the power cord to the Mobile Gateway™ video server. 

4.  Power on the Mobile Gateway™ video server. 

5.  Run the Mobile Gateway™ video server Finder utility to configure the Mobile Gateway™ 

video server. 

Mobile Gateway™ configures in much the same way as a “standard” analog to IP video server: 
use the Mobile Gateway™ Finder utility to locate servers and configure them remotely on the 
network.  

To use the Mobile Gateway™ Finder utility, insert the CD into a CD-ROM. Browse to the CD 
Drive on the PC and launch Finder.exe. The utility will launch: