Hunter 43553-01 用户手册

43553-01  •  05/15/09  •  Hunter Fan Company

1.  Unscrew the three screws from the upper switch housing. Disconnect 

the 9-pin plug connectors. Remove the lower switch housing.

2.  Push the plug button from inside the lower switch housing to remove 

the plug button and switch housing cap.

 

NOTE: Save the plug button and switch housing cap should you 
choose to remove the light fixture in the future.

3.  Feed the two wires from the light fixture through the center hole in 

the lower switch housing.

4.  Screw the threaded rod of the light fixture into the center of the lower 

switch housing until you feel resistance. Unscrew the light fixture 
slightly until the holes of the light fixture are aligned with the holes in 
the lower switch housing.

5.  Finish attaching the light fixture to the lower switch housing using the 

two attachment screws included. Securely tighten the two screws.

6.  Install the nut and washer inside the lower switch housing onto the 

threaded rod from the upper light housing.

9-Pin Plug 

Connector

Lower Switch 

Housing

Plug Button

Screw

Lower 

Switch 

Housing

Light 

Fixture

 WARNING: Improper installation could 

cause the light fixture to fall, or result in 
electrical shock or personal injury.

Washer

Nut

Attachment 

Screws

Threaded 

Rod