Husqvarna 327P5X 用户手册

下载
页码 36
 
KEY 
 
T
 
O SYMBOLS
 
2
 
 – 
 
English
 
Symbols
 
W
 
ARNING! The machine can be a 
dangerous tool if used incorrectly or 
carelessly, which can cause serious 
or fatal injury to the operator or 
others. It is extremely important that 
you read and understand the 
contents of the operator’s manual.
 
Please read the operator’s manual 
carefully and make sure you 
understand the instructions before 
using the machine.
 
Always wear:
A protective helmet where there 
is a risk of falling objects
Approved hearing protection
Protective goggles or a visor
 
This product is in accordance with 
applicable EC directives.
This machine is not electrically 
insulated. If the machine 
touches or comes close to high-
voltage power lines it could lead 
to death or serious bodily injury. 
Electricity can jump from one 
point to another by arcing. The 
higher the voltage, the greater 
the distance electricity can 
jump. Electricity can also travel 
through branches and other 
objects, especially if they are 
wet. Always keep a distance of at least 10 m between the 
machine and high-voltage power lines and/or any objects 
that are touching them. If have to work within this safe 
distance you should always contact the relevant power 
company to make sure the power is switched off before 
you start work.
This machine has a long reach. Make sure that no people 
or animals come closer than 15 m when the machine is 
running.
 
 
Always wear approved protective 
gloves.
 
 
Wear sturdy, non-slip boots.
 
Other symbols/decals on the mac
 
hine refer to special 
certification requirements for certain markets.
 
The engine is s
 
witched off by moving 
the stop switch to the stop position. 
CAUTION! The stop switch 
automatically returns to the start 
position. In order to prevent 
unintentional starting, the spark plug 
cap must be removed from the spark plug when 
assembling, checking and/or performing maintenance. 
 
 
Always wear approved protective 
gloves.
 
 
Regular cleaning is required.
 
 
Visual check.
 
 
Protective goggles or a visor must be 
worn.
 
 
Filling with chain oil and adjusting oil 
flow