HSM Paper Shredder HSM FA 500.2 用户手册

下载
页码 20
0702 
 
3
FA 500.2
Danger of injury
Do not reach into the paper feed 
opening.
Splinters can cause injury
Wear protective goggles when de-
stroying diskettes, CDs and hard 
credit cards.
Danger of injury during intake
Do not go near the paper feed open-
ing with long hair, loose clothing, ties, 
scarves, necklaces, bracelets etc. 
Do not destroy any material which 
might become tangled, such as tapes, 
binder ties or foil.
Switch off the shredder and pull 
out the power plug
 before moving 
or cleaning the shredder, or any other 
task outside its normal scope of use.
Maintenance and service tasks may 
only be performed by HSM customer 
service and service engineers of our 
dealers.
1.  Proper use, warranty
The document shredder is designed for destroying paper 
and cardboard, as well as store cards, credit cards, CD-
ROMs and fl oppy discs. Its sturdy drive mechanism is not 
damaged by paper clips and staples and is even suitable 
for shredding whole fi les and folders.
Our general business conditions are applicable. We pro-
vide a one year warranty for the document shredder. The 
warranty period is 6 months when used in multiple shifts. 
This warranty excludes wear, damage due to improper 
handling, natural depreciation, and actions taken by third 
parties.
2. Safety 
instructions
Caution:
It is prohibited to operate one only machine 
of a combination-version machine. Only 
the combination of document shredder and 
HSM baling press fulfi ls the requirements of 
EN 294 (Safety clearances).
•  Read the operating manual before starting up the 
shredder.
•  Do not remove or modify safety devices which guar-
antee the safe operation of the machine.
•  Observe all safety instructions attached to the ma-
chine.
•  The shredder may not be operated by anyone under 
16 years of age. 
•  Carry out inspection and maintenance regularly.
•  Switch off the shredder, disconnect the power plug 
and call customer service in the following circum-
stances:
-  power cables or plugs are damaged
-  liquid has entered the shredder
-  the shredder has been exposed to rain
-  the machine does not work properly despite the 
 
operating manual having been observed
-  the shredder has been damaged
•  No platforms or other raised surfaces may be placed 
near the shredder if they encroach on the specifi ed 
safety clearances.
Operating controls for your safety
Emergency stop button
In the event of danger, press the 
emergency stop button immediately.
This switches off the shredder, and 
stops the cutting block and feed belt.
Main switch (only Solo-version)
In the event of danger, turn the main 
switch to “0”.
You can secure the main switch in 
this position with a padlock to prevent 
restarting.