Husqvarna Grinder SG13B 用户手册
OPERATION
26 -
HUSQVARNA
Preparation
Dig away the earth and remove any stones near
•
the tree stump that may interfere with your work.
Check that the ground is free of foreign objects,
such as electrical cables, barbed wire, etc.
Cut or trim the stump as necessary using a power
Cut or trim the stump as necessary using a power
•
saw.
Review all of the machine’s safety decals.
Review all of the machine’s safety decals.
•
8011-141
8011-191
Use a hard hat, ear and eye protection. A mesh
•
visor alone does not provide sufficient eye
protection; supplement with protective glasses.
8011-193
Make sure that you are familiar with safety
•
regulations and shutdown procedures described
previously in the operator’s manual.
Make sure that all guards are in place and in good
Make sure that all guards are in place and in good
•
condition.
Make sure that the blades and cutters are in place
Make sure that the blades and cutters are in place
•
and in good condition.
Make sure that the work area and cutter in
Make sure that the work area and cutter in
•
particular and free from metallic objects such as
wire, nails, etc. that could be thrown out and injure
persons in the vicinity and damage the equipment.
Make sure that everyone, including children and
Make sure that everyone, including children and
•
animals, maintains a distance of at least 50 feet
(15 M) from the machine. Debris can be thrown
out and injure people and animals.