HP C4381-90100 用户手册

■

In Windows 95, simply click on the Connect or Disconnect external 
drive icon on your desktop. 

Select Shuttle EPAT External ATAPI Adapter, then click Disconnect.

Restart your computer, or shut it down and then turn it on again. 
Watch for the green light on the front of the CD-Writer Plus drive to 
blink as the computer boots up

Select Shuttle EPAT External ATAPI Adapter, then click Connect.

■

Make sure the CD-Writer Plus drive’s cables are connected properly.

■

See “Check for a conflict with the parallel port (some other device using the 
same IRQ or I/O as the parallel port).” on page 1-10. For example, a 
sound board or fax/modem board may be using the same IRQ. If you 
discover a conflict(s), change the setting on the other device. Refer to 
the manuals that came with your computer and other devices for 
instructions.

■

The power supply should have a steady green light when connected 
at both ends. If it is flashing, try a different power outlet. If it is still 
flashing the power supply could be damaged.

You can remove all of CD-Writer Plus’s programs or individual programs.

1. Click the Start button.

■

Point to Programs.

■

Point to HP CD-Writer Plus.

■

Point to Tools & Information.

■

Point to Utilities.

■

Click Uninstall.