Honeywell Work Light DR4300 用户手册

The recorder is almost ready for operation when you have: 

•  mounted and wired the recorder as described in Section 2 
•  set up the recorder as described in Subsection 3.2 
•  prepared the recorder as described in Subsection 3.3.2 

The only remaining tasks are aligning the chart time and applying power.  

To set the chart time and apply power, follow the procedure in Table 3-5. (See also Figure 3-5.)  

Open the door. 

Pull up the pen lifter to raise the pen(s) from the chart plate. Open the hub locking clip. 

Turn the chart until the desired time line on the chart is aligned with the time index on the chart 
plate and pen 1 before closing the locking clip on the hub. Push down on the lifter to return the 
pen(s) to the chart. 

 

Close the door and apply power.  

The pen(s) will move into position and the recorder will start to track the input value. 

Large chart
hub

24212

Time index

Pen lifter