Husqvarna HUSQVARNA YTH20K46 业主指南

(2) Keys

(1) Oil Drain Tube 

When right or left hand is mentioned in this man ual, it means 

when you are in the operating po si tion (seated be hind the 

steer ing wheel).

•  Remove all accessible loose parts and parts cartons  

from carton.

•  Cut along dashed lines on all four panels of carton. 

Remove end panels and lay side panels flat.

•  Check for any additional loose parts or cartons and 

remove.

Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping 

puposes.

•  Sit in seat.
• 

Lift up adjustment lever (A) and slide seat until a com-

fortable position is reached which allows you to press 

clutch/brake pedal all the way down.

•  Release lever to lock seat in position.

NOTE: You may now roll your tractor off the skid. Follow 

the ap pro pri ate instruction below to remove the tractor 

from the skid.

  WARNING: Before start ing, read, un der stand and fol low 

all in struc tions in the Op er a tion section of this man u al. Be 

sure tractor is in a well-ventilated area. Be sure the area in  

front of tractor is clear of other peo ple and objects.

•  Raise attachment lift lever to its highest po si tion.
•  Release parking brake by de press ing brake ped al.
•  Place freewheel control in dis en gaged po si tion to dis-

 en gage trans mis sion (See “TO TRANS PORT” in the 

Op er a tion section of this manual).

•  Roll tractor forward off skid.

1.  Lift seat pan to raised position and open battery box 

door.

NOTE: If this battery is put into service after month and 

year indicated on label (label located between termi-

nals) charge battery for minimum of one hour at 6-10 

amps. (See "BATTERY" in Maintenance section of this 

manual for charging instructions).

02021

Battery box door

Seat pan

Label

Terminal

Terminal