Hitachi Projector Accessories HAS-K250 用户手册

(L) × 3

(N) × 1

 Attach the bracket (B) to the LCD projector using four M4 × 8 (G) hexagon 

    Tightening torque: 0.98 N•m (10 kgf•cm)

 Attach the arm (M) to the base bracket (O). 

     Insert the tab at the top of the arm (M) in the groove at the top of the base bracket (O). Then insert the U-groove 

at the bottom of the arm (M) in the groove of the vertical adjusting nut in the base bracket.

 Use three M5 shoulder screws (L), three washers (P) and one M5 screw with 

    Tightening torque: 0.98 N•m (10 kgf•cm)

(N) 

(L) (P) 

(P) 

(P) 

(G) 

(B) 

(L) 

(L) 

Projection 

direction

Projection 

direction

Projection 

direction

Projection 

direction

■  

Never use screws other than those designated. 

  Failure to heed this warning may cause the projector to fall or other hazard 

resulting in damage or injury.

Place the tabs (rear of arm) in the grooves.

(O) 

(M) 

*#5-A'0)KPFF