Hitachi 3300MFP 用户手册

EN

Printed page is different from what appeared onscreen 157

●

Try printing a job that you has printed correctly.

●

If possible, attach the cable and printer to another computer, and try printing a job that you 
know has printed correctly.

●

Try using a new IEEE 1284-B-compliant parallel or USB cable. See 

 for information.

●

The wrong printer driver might have been selected when the software was installed. Make 
sure that the HP LaserJet 3300 is selected in the printer properties.

●

There might be a problem with your software application. Try printing from another software 
application.

●

Make sure that your file does not contain blank pages.

●

The sealing tape might still be in the print cartridge. Remove the print cartridge, and pull out 
the sealing tape.

●

Reinstall the print cartridge. See 

 for instructions. 

●

To check the product, print a configuration page. See 

 for 

instructions.

●

The graphic settings in the printer properties might not be correct for the type of job that you 
are printing. Try a different graphic setting in the printer properties. See 

 for more information.

●

The printer driver might not work for the type of job that you are printing. Try using a different 
printer driver.

If you use a different printer driver, some product features may not be accessible.

If you used an older or different printer driver (printer software) to create the document or the 
printer properties settings in the software are different, the page format might change when you try 
to print using your new printer driver or settings. To help eliminate this problem, try the following:

●

Create documents and print them using the same printer driver (printer software) and printer 
properties settings regardless of which HP LaserJet printer you use to print them.

●

Change the resolution, paper size, font settings, and other settings. See 

 for more information.

The graphics settings might be unsuitable for your print job. Try the following:

●

Check the graphic settings, such as resolution, in the printer properties and adjust them as 
necessary. See 

 for more information.

●

Try using a different printer driver (software).

If you use a different printer driver, some product features may not be accessible.