Hitachi 3300MFP 用户手册
EN
The text cannot be edited 177
Does the original have a colored background?
Colored backgrounds can cause images in the foreground to blend too much. Try adjusting the
settings before you scan the original or enhancing the image after you scan the original. See
settings before you scan the original or enhancing the image after you scan the original. See
for more information.
Is the original longer than 381 mm (15 inches)?
The maximum scannable length is
381 mm (15 inches) using the ADF.
If the page exceeds the
maximum length, the scanner stops. Copies can be longer.
CAUTION
Do not try to pull the original from the ADF; you might damage the scanner or your original. See
for instructions.
Is the original too small?
The minimum size supported in the ADF for the HP LaserJet 3300 is 127 by 127 mm (5 by 5
inches). The original might be jammed. See
inches). The original might be jammed. See
for instructions.
Are you using HP LaserJet Director?
Your default property settings for HP LaserJet Director might be set to automatically perform a
specific task other than the one you are attempting. For example, you can set HP LaserJet
Director to automatically perform a scan to e-mail. This means that your image does not show up
on the screen but is attached to an e-mail message as a file. See the product software Help for
instructions on changing the properties in HP LaserJet Director.
specific task other than the one you are attempting. For example, you can set HP LaserJet
Director to automatically perform a scan to e-mail. This means that your image does not show up
on the screen but is attached to an e-mail message as a file. See the product software Help for
instructions on changing the properties in HP LaserJet Director.
Is the paper size correct?
In Scan settings (in the HP LaserJet Scan Control Viewer), make sure that the input paper size is
large enough for the document that you are scanning.
large enough for the document that you are scanning.
Did you check for missing text in selected regions?
Scan your document in page-by-page mode and make sure that missing text is in a selected
region. If you are performing an OCR operation on a document, colored text does not scan well, if
at all.
region. If you are performing an OCR operation on a document, colored text does not scan well, if
at all.
The text cannot be edited
Is the product software set to edit text (OCR)?
Text remains as a single image until the Optical Character Recognition (OCR) application converts
the single image into text that you can edit. See
the single image into text that you can edit. See
for more information.
Was the original loaded correctly?
For OCR, the original must be loaded top forward and face up into the ADF. If using the flatbed
scanner, make sure to load originals correctly. Place the original document face down on the
flatbed scanner with the top left corner of the document located in the lower right corner of the
glass.
scanner, make sure to load originals correctly. Place the original document face down on the
flatbed scanner with the top left corner of the document located in the lower right corner of the
glass.
Are you using the correct word processing application?
Your OCR application might be linked to a word processing application that does not perform OCR
tasks. See the product software Help for more information about linking applications.
tasks. See the product software Help for more information about linking applications.