Hitachi 3300MFP 用户手册
EN
Verifying your work 33
Verifying your work
After setting up the product, verify your work by testing your HP LaserJet 3300 product’s printing
and copying functions.
and copying functions.
To self-test the printer
To test the printer, use the following steps:
1
On the product’s control panel, press menu/enter.
2
Use the < and > buttons to select
Reports
and press menu/enter.
3
Use the < and > buttons to select
Config Report
and press menu/enter.
A configuration page prints, showing the product’s current configuration and the control panel
display returns to
display returns to
Ready
.
To self-test the copier using the ADF input tray
Use the configuration page you just printed to test the copier.
1
Adjust the guides on the ADF input tray to the size of the configuration page.
2
Place the configuration page into the ADF input tray top first, print side up. Verify that the
control panel display reads
control panel display reads
Document Loaded
.
3
On the product’s control panel, press start/copy.
The product makes a copy of the configuration page and the control panel display returns to
Ready
. If the page does not copy successfully, see
.
1
2