Hitachi 3300MFP 用户手册
EN
Printing transparencies and labels 47
Printing transparencies and labels
Only use transparencies and labels that are recommended for use in laser printers, such as HP
transparency film and laser quality labels. See
transparency film and laser quality labels. See
for more information.
CAUTION
Inspect the media to make sure that it is not wrinkled or curled and that it does not have any torn
edges or missing labels. Do not run labels through the product more than once. The adhesive may
damage the product.
edges or missing labels. Do not run labels through the product more than once. The adhesive may
damage the product.
To print transparencies or labels
1
Open the straight-through output door on the back of the product.
2
Load a single page in the priority input tray or load multiple pages in the main input tray. Make
sure that the top of the media is forward and the side to be printed (rough side of
transparencies) is facing up.
sure that the top of the media is forward and the side to be printed (rough side of
transparencies) is facing up.
3
Adjust the media guides.
4
Access the optimizing feature from the Paper tab in your Windows printer driver. Then select
Optimize for: and choose Transparency or Labels in the drop-down list.
Optimize for: and choose Transparency or Labels in the drop-down list.
5
Print the document. Remove the media from the back of the printer as it prints to prevent it
from sticking together, and place the printed pages on a flat surface.
from sticking together, and place the printed pages on a flat surface.