Hitachi 3300MFP 用户手册
94 7 Faxing
EN
2
Use the < or > button to select
Fax Setup
and press menu/enter.
3
Use the < or > button to select
Fax Recv. Setup
and press menu/enter.
4
Use the < or > button to select
Extension Phone
and press menu/enter.
5
Use the < or > button to select
On
or
Off
and press menu/enter to save your selection.
Sending a fax by dialing from a telephone
At times, you might want to dial a fax number from a telephone connected to the same line as the
product. For example, if you are sending a fax to a person whose product is in manual receive
mode, you can call first to let that person know the fax is coming.
product. For example, if you are sending a fax to a person whose product is in manual receive
mode, you can call first to let that person know the fax is coming.
To send a fax by dialing from a telephone
1
Load the document into the ADF input tray.
2
Pick up the handset of a phone connected to the same line as the product and dial the fax
number using either the phone’s or the product’s numeric buttons.
number using either the phone’s or the product’s numeric buttons.
3
When the recipient answers, instruct the recipient to start the fax machine.
4
When you hear the fax tones, press fax/send to begin transmitting the fax, wait until the
display reads
display reads
Connecting
, and hang up the phone.
Changing the HP LaserJet 3330 product’s volume settings
You can control the volume of the following fax sounds from the product’s control panel:
●
The fax sounds associated with incoming and outgoing faxes
●
The ring for incoming faxes
For information on controlling general volume settings, see
.
To change the fax sounds (line monitor) volume
1
Press volume on the control panel.
2
Use the < and > buttons to select
Off
,
Soft
,
Medium
, or
Loud
.
3
Press menu/enter to save your selection.
Note
The default set at the factory is
Soft
.
To change the ring volume
The ring is heard when the device is initially sending or receiving a call. The ring duration length is
based on the local telecom ring pattern length.
based on the local telecom ring pattern length.
1
Press menu/enter.
2
Use the < or > button to select
Common Settings
and press menu/enter.
3
Use the < or > button to select
Volume Settings
and press menu/enter.
4
Press the > button once to select
Ring Volume
and press menu/enter.
5
Use the < or > button to select
Off
,
Soft
,
Medium
, or
Loud
.