Hitachi 3300MFP 用户手册
EN
Connecting a printer cable to your product 27
Connecting a printer cable to your product
To connect a printer cable to your product, use the following steps:
Note
Windows 95 and Windows NT 4.0 do not support USB cable
connections with the printer. Macintosh computers do not support
parallel cable connections.
connections with the printer. Macintosh computers do not support
parallel cable connections.
1
Open the print cartridge door by pulling the sides of the door
forward as shown.
forward as shown.
2
Open the product’s left side panel by pressing the release latch.
3
Plug one end of the USB (1) or parallel cable (2) into the correct
socket inside the left side panel as shown.
socket inside the left side panel as shown.
4
Thread the cable through the left side panel opening as shown, and
close the left side panel.
close the left side panel.
Note
If you are using a USB cable, it should be threaded through the upper
notch in the left side panel. If you are using a parallel cable, it should be
threaded through the lower notch.
notch in the left side panel. If you are using a parallel cable, it should be
threaded through the lower notch.
1
2
3
1
2
4