Hach DR 5000 用户手册
52
Standard Operations
1. In the result display, press Options>More>Chemical Form.
A list of available evaluation forms appears.
2. Select the required chemical form and press OK to confirm.
Note: The selected chemical form is displayed, but does not become
the default. To change the default, see
the default. To change the default, see
5.5.3.1 Change of the default setting of the chemical form
1. Insert the blank or sample cuvette/vial (depending on the
working procedure) into the cell compartment and close the cell
compartment.
compartment.
2. In the result display, press Options>More>Chemical Form.
3. A list of available evaluation forms appear. Select the new
default setting.
4. Press Save as Default.
The current result and all further measurements will be displayed in
the new chemical form.
the new chemical form.
5.5.4 Basic test-specific and sample-specific data settings
Press Options to change test or sample specific settings.
Table 5 Barcode program options
Options
Description
More
For further Options
Store Off/On
With the Store On setting, all measurement data are stored automatically. With the Store Off
setting, no measurement data are stored.
setting, no measurement data are stored.
Abs % Trans
To switch to % transmittance or absorbance readings