Global Technology Associates SOFTWARE FIREWALL GBWA200501-01 用户手册

 

3 – Configuration 21

If using the web user interface, you will need:

•  1 crossover Ethernet cable to connect with the computer directly, 

or 1 straight-through Ethernet cable to connect with the computer 
through a hub or switch

•  2 straight-through Ethernet cables, one for each required network 

connection

•  1 computer with a SSL-compatible and frames-enabled browser

If using GBAdmin, you will need:

•  1 crossover Ethernet cable to connect with the computer directly, 

or 1 straight-through Ethernet cable to connect with the computer 
through a hub or switch

•  2 straight-through Ethernet cables, one for each required network 

connection

•  1 Windows computer

If using the video console, you will need:

•  1 keyboard

•  1 monitor

If using the serial console, you will need:

•  1 null-modem serial cable
•  1 computer with a serial port

If you want to initially configure your firewall using GBAdmin or a 
browser, you will need to construct a temporary peer Ethernet network.

The video console version of the GB-Ware runtime does not have 
factory default network settings, and hence does not initially allow 
any network or serial connections; you will need to run the video 
Setup Wizard  before you can use your firewall. This will perform 
initial network setup on your firewall so that you can then connect 
remotely with either GBAdmin or the web UI.

GBAdmin and the web user interface for the GB-Ware firewall occur over 
an Ethernet network connection. Because the factory network informa-
tion settings on the serial version of the GB-Ware firewall are unlikely to 
match your existing network, your firewall will not automatically join your 
network. 

You will need to temporarily join a computer to the firewall’s default 
network. This allows you to configure the firewall’s network settings to