Ginsu Minute Mount L-Series 产品宣传页

下载
页码 1
Copyright
©
 2005 Douglas Dynamics, L.L.C. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any 
printed, mechanical, electronic, film or other distribution and storage media, without the written consent of Fisher Engineering. Authorization 
to photocopy items for internal or personal use by Fisher Engineering outlets or snowplow owner is granted.
Fisher Engineering reserves the right under its product improvement policy to change construction or design details and furnish equipment 
when so altered without reference to illustrations or specifications used. Fisher Engineering and the vehicle manufacturer may require 
and/or recommend optional equipment for snow removal. Do not exceed vehicle ratings with a snowplow. Fisher Engineering offers a limited 
warranty for all snowplows and accessories. See separately printed page for this important information. The following are registered (
®
) or 
unregistered (™) trademarks of Douglas Dynamics, L.L.C.: EZ-V
®
, FISHER
®
, Minute Mount
®
, ProTube™, SnoFoil
®
.
Printed in U.S.A.
Lit. No. 28374, Rev. 01 
October 1, 2005
8248
Atta
chm
ent
Arm
Push
pla
te
Jack Lever
Jack 
Stand (Rai
sed)
Headgear
Connecting Pin
Withdrawn
Jack Coll
ar
Jack Leg
Jack St
and
Jack
Stand
Jack Lever
Conne
ctin
g
Pin
A.
1. 
Place cab control in
 
"Lower/Float".
2. 
Push 
lift arm down.
3. 
Pull jack 
lever outward. 
Jack 
stand will adjust to
 prope
height.
U.S
. Pa
tent
s
4,280
,062,
4,999
,935,
5,353,530,
5,4
20,
480
and 
other 
pate
nts 
pend
ing
A.
1.  Drive vehicle
 forward fully
engaging pushpl
ates into 
att achment arms.
B.
1.  T
wist connecting 
pin 
to release 
tension.
2.  Remove 
elec
trical
 covers on 
vehicle.
3.  
Attach electrical conne
ctor to 
correspo
nding con
nector on 
vehicle.
4.  Repeat step
s B 1-3 on 
passenger side 
of veh
icle.
5.  Connect hydraul
ic hoses to 
quick disconnect
s. (BEL
DRIVE ONL
Y)
C.
1.  
Release carr
ying chai
n and 
reatt
ach it lea
ving plenty of 
slack.
2. 
Push headgea
r upward 
toward 
vehicle until connec
ting pins 
snap in 
place.
3.  
Pull jack
 lever outward an
raise 
the jack st
and.
MO
UN
TING
PLO
W
RE
MO
VIN
G PL
OW
B.
1. Disconn
ect 
electrical
 connector 
and 
reinser
t in protect
ive 
cover
.
2.
Insert r
elease rod under jack 
collar
.
3.
Push down on rele
ase rod as 
you pu
ll and twist connecting 
pin.
4.
Repeat S
tep
s B 1-3 on 
passenger side.
5.
Disconnect hydraulic hose 
couplings and 
cover with 
dust 
plugs.
C.
1.  
Remove slack from carrying 
chain 
and reatt
ach.
2.   Back vehicle away
 from plow
.
LOWER BLADE WHEN VEHICLE IS PARKED.
REMOVE BLADE ASSEMBLY BEFORE PLACING 
VEHICLE ON HOIST.
DO NOT EXCEED GVWR OR GAWR INCLUDING BLADE 
AND BALLAST.
READ OWNER'S MANUAL BEFORE OPERATING OR 
SERVICING SNOWPLOW.
TRANSPORT SPEED SHOULD NOT EXCEED 45 MPH. 
REDUCE SPEED UNDER ADVERSE TRAVEL 
CONDITIONS.
PLOWING SPEED SHOULD NOT EXCEED 10 MPH.
SEE YOUR SALES OUTLET FOR APPLICATION 
RECOMMENDATIONS.
59900
WARNING
CAUTION
A
CCESSORIES
Item 
Part 
Description 
Item
Part 
Description 
90 
28549  Universal Label Replacement Kit 
98 
22215  6'-9" Poly Cutting Edge (LD) 
91 
22400K  2 oz. Dielectric Grease Tube
22216  7-1/2' Poly Cutting Edge (LD) 
92 
26239  ProTube™ Bumper/Grille Guard – Stainless 
5532 
7-1/2' Steel Cutting Edge (RD) 
 
26240  ProTube™ Bumper/Grille Guard – Black 
5533 
8' Steel Cutting Edge (HD) 
93  26018-1  Mini Strobe Light 
26460  8-1/2' Steel Cutting Edge (HD) 
94 
26019  Full-Size Strobe Light 
5534 
9’ Steel Cutting Edge (HD) 
95  26020-1  Mini Bar Light
28408  8-1/2' Steel Cutting Edge (V) 
96 8251 
7-1/2' 
SnoFoil
®
 Assembly (RD) 
26593  9-1/2' Steel Cutting Edge (V) 
 8252 
8' 
SnoFoil
®
 Assembly (HD) 
27362  9' Steel Cutting Edge (MC) 
 26880 
8-1/2' 
SnoFoil
®
 Assembly (HD) 
27239  10' Steel Cutting Edge – 2 Sections (MC) 
 8253 
9' 
SnoFoil
®
 Assembly (HD) 
99 
27195  26" Flexible Blade Guide Set (LD, MC, V)
 22380 
9' 
SnoFoil
®
 Assembly (MC) 
7906K  Blade Guide Set (RD, HD) 
 22200 
10' 
SnoFoil
®
 Assembly  (MC) 
26530K  Commercial Blade Guide Set (All) 
97  22470-1  7-1/2', 8', 8-1/2', & 9' Rubber Deflector  
100 
20043  Spring Replacement Tool 
(LD, RD, HD) 
101 
26145  Shoe Kit (LD) 
21619  8-1/2' Rubber Deflector (V) 
102 
20555  Skid Plate Kit 
26572  9-1/2' Rubber Deflector (V)  
ns 
26812-1  Plow Parka 
22390  9' & 10' Rubber Deflector (MC) 
ns 
5242 
12 oz. Yellow Spray Paint (Painted Blades) 
22269  6'-9" Steel Deflector (LD) 
ns 
20498  12 oz. Black Spray Paint (Powder-Coat) 
283 
7-1/2' Steel Deflector (LD, RD) 
ns 
27242  12 oz. Yellow Spray Paint (Powder-Coat) 
26480  8' Steel Deflector (HD) 
ns 
5492Y  1 Quart Yellow Paint Can 
26485  8-1/2' Steel Deflector (HD) 
ns 
5490Y  1 Gallon Yellow Paint Can
26490  9' Steel Deflector (HD, MC) 
ns 
28531  1 Quart EZ Flow Hydraulic Fluid 
ns 
28532  1 Gallon EZ Flow Hydraulic Fluid 
B
LADES
Item 
Part 
Description 
Item
Part 
Description 
60 – 
6'-9" 
Blade
3
 (LD) 
72 
– 
8-1/2' EZ-V
®
 Blade 
7-1/2' Blade
3
 (LD) 
– 
9-1/2' EZ-V
®
 Blade 
61 
22180  6'-9" Base Angle (LD) 
73 
21569  8-1/2' Blade Half – DS (V) 
22181  7-1/2' Base Angle (LD) 
26599  9-1/2' Blade Half – DS (V) 
62 
5523K  3/4 x 2-3/16 Machine Pin w/Cotter Pin 
74 
21570  8-1/2' Blade Half – PS (V) 
63 – 
– 
7' L-Series Blade
3
 (RD) 
26600  9-1/2' Blade Half – PS (V) 
– 
7-1/2' L-Series Blade
(RD) 
75 
21564  8-1/2' Base Angle – DS (V) 
– 
8' L-Series Blade
(HD) 
26597  9-1/2' Base Angle – DS (V) 
– 
8-1/2' L-Series Blade
(HD) 
76 
21565  8-1/2' Base Angle – PS (V) 
– 
– 
9' L-Series Blade
(HD) 
26598  9-1/2' Base Angle – PS (V) 
64 
7869 
7' Base Angle (RD) 
77 
22260  1 OD x 4-3/4 Clevis Pin 
7667 
7-1/2' Base Angle (RD) 
78 
90601  1/4 x 1-1/2 Cotter Pin 
7668 
8' Base Angle (HD) 
79 
20790  Commercial Ram Pin 
26885  8-1/2' Base Angle (HD) 
80 
90013  1/4 x 2 Cotter Pin  
7669 
9' Base Angle (HD) 
81 
21001  Center Deflector (bolted A-Frame)
65 – 
9' 
Blade
3
 (MC) 
21873  Center Deflector 
10' Blade
3
 (MC) 
82 
83 
26858 Center 
Flap 
Kit 
66 
22369  9' Base Angle (MC
1
) 63508 
Rubber 
Flap 
27259  9' Base Angle (MC
2
84 
26523  6" Solid Cast Shoe Assembly (RD, HD, MC
2
, V)
20628  10' Two-Piece Base Angle – DS (MC
1
A5517  7" Anti-Wear Shoe Assembly (MC
1
20629  10' Two-Piece Base Angle – PS (MC
1
85 
26464  Removable Spring Assembly  
27240  10' One-Piece Base Angle (MC
2
)  
(LD, RD, HD, 10' MC
2
67 
20639K  3/4 x 3-15/32 Machine Pin w/Cotter Pin
1
21452  Removable Spring Assembly 
7903K  Anchor Pin w/Cotter Pin
 2
(9' MC, 10' MC
1
, V) 
68 
5523K  3/4 x 2-3/16 Machine Pin w/Cotter Pin
 1
86 
20757  Removable Spring Bar (LD, RD, HD, 10' MC
2
27241  1 x 2-3/4 Clevis Pin w/Cotter Pin
 2
21450  Removable Spring Bar (9' MC, 10' MC
1
, V) 
69 20702 
Angle 
Frame 
(MC
1
87 
27406  Trip Spring (LD, RD, HD, 10' MC
2
 27237 
Angle 
Frame 
(MC
2
5323 
Trip Spring (9' MC, 10' MC
1
, V) 
70 
90127  5/8-11 x 1-1/2 Hex Cap Screw G5
88 
26656K  Shoulder Bolt w/Locknut 
71 
91337  5/8-11 Hex Locknut GB 
1
 = Distinguished by a 3/4" base angle pin and a 3/8" Top Anchor; 10' blade has a two-piece base angle 
2
 = Distinguished by a 1" base angle pin and a 1/2" Top Anchor; 10' blade has a one-piece base angle 
3
 = Complete blade no longer manufactured.
G = grade 
A-F
RAMES
Item 
Part 
Description 
Item
Part 
Description 
30 
22169  A-Frame w/Hardware (6'-9" LD) 
41 
20790  Commercial Ram Pin 
22175  A-Frame w/Hardware (7-1/2' LD) 
42 
20988  V-Plow Pivot Pin 
31 
8562 
A-Frame w/Hardware (RD – X = 22-1/2") 
43 
26463  1/4 x 2 Slotted Spring Pin 
22168  A-Frame w/Hardware (HD – X = 22-1/2") 
44 
22260  1 OD x 4-3/4 Clevis Pin 
8627 
A-Frame w/Hardware (HD – X = 25-1/8") 
45 
26583  Blade Stop 
32  20703-1  A-Frame Kit w/Hardware and Angle Frame  
46  21484-1  Push Assembly 
Guide (MC) 
47 
22161  A-Frame Stop Kit 
33  21874-3  A-Frame (V) 
48 
7904K  Clevis Pin w/Cotter Pin 
34 
22259  1 OD x 8-3/4 Pivot Pin 
49 
5150 
1-1/4 x 4-7/8 Anchor Pin  
35 
90013  1/4 x 2 Cotter Pin  
50 
8229 
Chain Bag (LD) 
36 
7903K  Anchor Pin w/Cotter Pin 
8565 
Chain Bag (RD) 
37 
90601  1/4 x 1-1/2 Cotter Pin 
8555 
Chain Bag (HD, V) 
38 
7905K  Pivot Pin w/Cotter Pin 
21853  Chain Bag (MC) 
39 
20789  1-1/4 x 6-3/4 Commercial Pivot Pin 
51 
A6148K  U-Bolt w/Hardware 
40 
20775  Commercial Angle Frame Guide 
H
EADGEAR
Item 
Part 
Description 
Item
Part 
Description 
21920  Lift Arm 
8184 
Jack Leg (6'-9" & 7-1/2' LD) 
22341  Headgear (6'-9" LD) 
20490  Jack Leg (RD/HD) 
22090  Headgear (7-1/2' LD) 
20491  Jack Leg (HD, MC, V) 
8580 
Headgear (RD/HD) 
27164K  Jack Handle Kit 
8480 
Headgear (HD) 
8180 
Jack Lever (6'-9" & 7-1/2' LD) 
20758  Headgear (MC) 
8499K  Jack Lever (RD/HD, HD, MC, V) 
21846  Headgear (V) 
10 
7794 
1/2 OD x 2 Compression Spring  
8514 
Headgear Brace (RD/HD, HD, MC, V) 
11 
90658  5/32 x 1-1/4 Cotter Pin 
20070  Lower Gear (6'-9" LD) 
12 
20185  Torsion Spring Kit 
8561 
Lower Gear (7-1/2' LD, RD/HD) 
13 
6920K  Connecting Pin Kit 
8533 
Lower Gear (HD, V) 
14 
6815 
Connecting Pin w/Handle 
20759  Lower Gear (MC) 
15 
821 
1 ID x 3-1/2 Compression Spring 
8202 
Release Rod (6'-9" & 7-1/2' LD) 
16 
8498 
Bolting Bar (7-1/2' LD, RD/HD, HD, MC, V) 
8551 
Release Rod (RD/HD, HD, MC, V) 
17 
8741 
Cable Boot Bracket 
8183 
Jack Support (6'-9" & 7-1/2' LD) 
18 
8284K  Cable Boot 
20487  Jack Support (RD/HD) 
19 
4289K  3/4 x 1-7/8 Machine Pin w/Cotter Pin 
20488  Jack Support (HD, MC, V) 
20 
7904K  Clevis Pin w/Cotter Pin 
65
68
60
63
72
30
31
45
43
33
32
20
20
14
15
13
4
12
3
5
7
8
6
10
11
9
17
18
19
1
16
2
19
91
90
99
92
96
97
98
94
93
95
101
100
102
76
78
77
84
83
82
75
62
74
73
81
71
69
70
84
66
80
67
79
88
87
85
86
64
78
84
77
62
61
77
62
44
37
46
38
48
47
51
50
42
40
35
35
49
41
35
51
39
50
51
48
36
38
50
48
36
51
50
35
34
X
** RD headgear shown. LD, HD, MC, and V parts may look different. **
78