Gerber Tools Saw 600 用户手册

3 – 11

When it is necessary to both move the origin and rotate the coordinate axes, be sure to rotate the coordi-

nate axes first.

Cutting or plotting can be stopped by pressing the 

 (PAUSE) key while cutting or plotting is in progress.

Raising or lowering the media set lever while the cutting or plotting is stopped does not require the medium

to be selected, so the medium can be replaced or reset.

Press the 

 (PAUSE) key while cutting or plotting is in progress to stop cutting or plotting and display the

PAUSE menu.

Press the 

 (NEXT) or 

 (PREV.) key key to alternate the display between “CONTINUE JOB” and

“QUIT JOB”.

Pressing the 

 (ENTER) key key while “CONTINUE JOB” is displayed cancels the pause function and

restarts cutting or plotting.

Pressing the 

 (ENTER) key while “QUIT JOB” is displayed displays the BUFFER CLEAR confirmation

screen for aborting the cutting/plotting operation.

Press the 

 or 

 key  to alternate the display between “YES” or “NO”.  To abort the cutting/plotting

operation, stop the transmission of data from the computer, select “YES”, and then press the 

 (ENTER)

key. All the cutting/plotting data stored in the buffer is cleared and the plotter returns to Ready status.

To cancel the aborting of the cutting/plotting operation, select “NO” and then press the 

 (ENTER) key.

The plotter returns to the “CONTINUE JOB” display.

After a new origin point is set, the displayed coordinate values of X= and Y= repre-
sent the respective distances from the new origin.