Gerber Tools Saw 600 用户手册

4 – 45

Load an A4-size or larger medium.

Press the 

 (PAUSE) key to switch to PAUSE mode.

Press the 

 (NEXT) or 

 (PREV.) key until the following menu is displayed.

Press the 

 (ENTER) key to display the test-mode submenu, and then press the 

 (NEXT) or 

(PREV.) key until the following menu is displayed.

Press the 

 (ENTER) key to switch to dump mode.

When data is sent to the cutting plotter in this mode, a dump list is printed out. To exit the dump mode, turn

on the power again.

■ Cutting Demo

This function cuts a cutting-demo pattern.

Mount a plotting pen in the pen carriage, and set the conditions to suit the pen used (e.g., force, pen speed

Load a film for cutting.

The dump list is printed out as ASCII character codes. Characters without codes
will be printed as small 2-digit figures. Output data for READ-type commands will
be output as dummy data, except for cutting-plotter status output.

The pen carriage begins moving as soon as this function is set. Keep your hands and
other objects away from the cutting plotter’s moving parts.

Load the medium so that it passes over the media sensor.