Generac Power Systems ZUMO 665 用户手册

Getting Started

2.  Tighten the nuts to secure the base. Do 

not overtighten.



Incorrectly installing the handlebar base to 

the clutch/brake bracket can cause brake 

or clutch malfunction, which can result 

in damage to the vehicle and the risk of 

personal injury or death. Garmin strongly 

recommends having an experienced installer 

with the proper knowledge of clutch/brake 

systems install the unit.

NOTE: Both 1/4” standard and M6 bolts are 

included. Match the size of the factory bolts 

on your clutch/brake clamp bracket.

1.  Remove the two factory bolts on your 

clutch/brake clamp bracket. 

2.  Thread the new bolts through the 

handlebar base, spacers, and clamp 

bracket. 

3.  Tighten the bolts to secure the base.

1.  Thread the M4 pan head screws through 

the washers, the cradle, the spacers, and 

the base plate. 

2.  Tighten the nuts to secure the base plate.

1.  Align the ball of the handlebar base and 

the ball of the base plate with the double‑

socket arm.

2.  Tighten the knob slightly.
3.  Adjust for better viewing and operation. 
4.  Tighten the knob to secure the mount.